A guide is needed while you are choosing tiles for the wall of the bathroom and shower as there are numerous sizes such as 450 x 450, 400 x 400, and 400 x 200 to name a few.

The idea of ​​laying down your walls can be daunting, but with the right preparation and using the right tools, it’s a lot easier than you think.

If you’re a little intimidated by wall tiles, don’t because we’ve created this handy guide that covers everything you need to know about wall tiles! You’ll utilize the buttons below to jump to the area you’re inquisitive about or simply scroll to read the total text.

Before you start, make sure the surface you will be working on is clean, dry, and flat. If you’re laying tile over wallpaper, peel it off over the plaster and fill in any gaps or cracks.

Check that the new plaster is dry before you start, remember that it can take at least two months to set properly and prime all porous surfaces with Mape Primer G. As with all DIY employments, appropriate planning, and your security come first.

Here is a list of the materials, protective gear, and tiling tools you need to get the job done safely and to a high standard.

The first step is to determine how many wall tiles you will need, to do this you need to calculate the area of ​​the space you will cover. Measure the height and width of the space, then multiply the numbers together.

Be beyond any doubt to account for the square footage of any entryways, windows, or cabinets and subtract that from the entire. To avoid perplexity, it is sometimes conceivable to form a quick portrait with all the dimensions noted. Once you have got settled the calculation, you’ll go ahead and purchase your tiles.

Most tile packs cover one square meter, but we recommend 5-10% more just in case. It is always recommended to start by tiling the grid in the center of the wall as it is easier to ensure that your pattern is symmetrical.

This also means that any half bricks you might need can be placed at the end of each row, with identical dimensions. While it’s tempting to start around the corner, it can leave you with erratic rows and a messy finish when you’re done.

As we mentioned earlier, build your vertical row from the middle of your space. You can find it simply by measuring the height and width and marking the middle with a pencil.

Gauge rods are a smart way to help you determine row and end tile sizes. We recommend 50mm x 25mm timber, although any will do, around 1.8m long depending on the size of the wall. Lay out a row of tiles with space between them, then align the edge of the slats with the edge of the first tile. Mark and number each tile and space on the rod with a pencil. This way it’s easy to see how many you need per line.

Step 1

Align the gauge rod with the center of the wall and mark the tile locations there.

Step 2

Once you get to the corner, check if the last tile needs to be cut to fit. If you need less than half the tiles, we recommend adjusting your starting position, as larger tiles look better when completed.

Step 3

If you need to move the starting point, align the rod with the original mark and make a new one between the two tile marks. This should mean that the end tiles you need to cut will be over half a tile wide, and your centerline and the center tile now match.

Step 4

Hold the gauge rod against the new mark and use a spirit level to make sure it’s straight, drawing a line from side to side.

Create horizontal lines

Once you’ve established vertical rows, it’s time for horizontal rows. We recommend using strips of wood attached to the wall as a guide, as they also help prevent slippage while the adhesive sets.

Step 1

Line up the gauge rod, vertical line, and baseboard/floor, then mark with a pencil next to the top tile mark on the rod. Do this up the wall along the vertical line until the rod touches the ceiling. Hopefully, the walls and post lines will match and you won’t have to cut tiles for the top and bottom rows. If not, just halve the distance from the wall to the postmark and, as with the vertical row, make sure it’s more than half a tile wide. If they are less than half the width of the tile, just use the following mark on the rod.

Step 2

Measure the distance between two wall markers and add another one between them.

Step 3

Move the gauge rod away from the baseboard/floor and line up its mark with the mark you just made. Make another mark with the foot of the rod. This will be where your horizontal line begins. Using a long ruler and spirit level, draw a line from the mark on the wall.

Step 4

Check for cables or pipes behind the wall, then nail the 50mm x 25mm battens. Its top edge should line up with the horizontal pencil line and should be straight. Then use another slat as a vertical line. It’s a good idea to leave the nailheads protruding a bit from the slats, as they will be easier to remove later. If you’re only partially tiling a wall, a full horizontal row of tiles at the top can give a much cleaner finish, so we think it’s definitely worth the time to get it right.

Step 1

Use the gauge rod to determine the position of the lowest horizontal row, then mark the position of the top row on the wall:

Step 2

Fill the gaps between the bottom row and the baseboard/floor with cut tiles. Remember, you don’t want them to be too small, so if they’re smaller than half a tile, move your top row:

Step 3

If you don’t like the idea of ​​cutting tiles and prefer to avoid it, check that the baseboards/walls are flat. Using a long straight batten, level with a spirit level and find the lowest point. If it is straight, you can use it to align your tiles. If not, it’s time to cut those tiles!

Guide for bathroom wall tiles

Selecting the best suited wall tiles for the bathroom needs a guide. Choosing the right bathroom tiles can be a challenge. There are many different looks and materials, different installation methods, and different features.

You want something that looks good, but also something that’s bathroom-friendly and easy to maintain given your time and ability. This is your go-to guide to learning more about the different types of bathroom tiles.

It’ll assist you to make the most excellent choice for your purchase and grant you the essentials of cleaning and maintenance. You’re ready to change the look of your bathroom, and the old tiles just need to be removed.

It’s time to revamp the bathroom to make it more modern and elegant. With so many bathroom designs to choose from, the project can get pretty huge. The type of tile you choose can be a factor, so when you begin your search for the best tile for your bathroom, take the time to find the one that will work best. So get out there and start shopping!

tile size

The size of the tile you place in the shower or tub, on the wall, on the backsplash above the vanity, or the floor can change the look of your bathroom. If you use large tiles in a small bathroom, it can make it feel more spacious. The room appears larger than it is because there are fewer grout lines between the tiles. Shower floors are generally better with smaller-sized tiles for better grip on your feet as there are more grout lines. But the bathroom floor itself usually has larger tiles.

tile color

When it comes to tiles, color variations and shades abound. Blues, greens, tans, whites, blacks, and more will amaze you as you walk down the aisles and see the abundance of options. Choose the color you want, then review this palette selection to help narrow down the options.

Grout color and thickness

After choosing the bathroom tile color, the color you choose for your grout line is equally important. Dark grout lines between tiles can make patterns or color changes in tiles stand out, while thin white or light grout lines between closely spaced tiles blend into the background.

style

Decide if you want a more traditional and classic look or a more stylish and modern look. White tiles are timeless, while iridescent glass tiles or brightly colored tiles are the ones that offer a bit of glamor when you enter the bathroom.

Bathroom tiles also come in several types. In this section, we focus on three: glass, natural stone, ceramic, and ceramic tile. These three different types of tiles have different prices and styles.

If you like variety and color, you might think glass tiles are perfect for you, lovers of luxury and natural materials will appreciate natural stone, and those on a budget will appreciate the toughness of ceramic and porcelain.

Here you may discover data on each sort of tile, counting their characteristics, arranging your buy, establishment, and upkeep. One of the advantages of ceramics and tiles is their price.

For someone with a low budget and designer taste, ceramic or porcelain may be the best option. Ceramics and porcelain come in a variety of styles, colors, and textures. They are beautiful and versatile, making them perfect for wet bathroom conditions.

Characteristics of porcelain and tiles:

• Affordable: These tiles won’t break the bank.
• Sleek and Versatile: Porcelain is suitable for all decorating styles. Traditional, rustic, contemporary, contemporary, eclectic, Asian, etc. can all advantage of the look of porcelain and ceramic.
• Ideal for bathrooms: Porcelain and ceramic resist moisture, stains, and scratches.
• Accents or Accents: Whether you’re considering an accent wall or an entire floor, ceramic and porcelain will do the trick.

As always, start by choosing your style and color. The great thing about porcelain and ceramics is that they come in so many different styles, from white marble to dark and moody.

Measure the area you wish to cover and quote the price in square feet. Ceramics and tile cost as little as $1.69 per square foot, making them the ideal low-budget and stylish option. It’s easy to install newly purchased tiles, but it’s also easy to get them wrong. Make sure you know how to properly install porcelain or tile.

Of course, if in doubt, don’t hesitate to ask your DIY friends or neighbors or call in a professional. If you want to maximize your investment, sometimes it’s worth investing in a little help. Cleaning porcelain and tile is easy.

However, cleaning products and techniques vary depending on whether the material is glazed or unglazed, so be sure to find out which one in advance. These tutorials for cleaning porcelain and ceramic floors can be easily applied to bathroom tiles – just replace the mop with a hand cloth.

Stick with it and find a tile that suits your taste, won’t hurt your wallet, and other designs that suit your home and give you the look you want. Ask yourself a few questions to help you figure it out.

Take the time to look at the rest of your home as it’s best to try and keep the same style and tone so your new bathroom can fit in every time you enter.

Unless you plan to remodel your home with a newly designed bathroom, plan to follow the style of your home so it fits in and offers better resale value if you decide to sell later. Replacing bathroom tiles can be expensive. Decide if you’re going to be staying home long or short term, as this can be a factor in how much you’re willing to spend on updating your room.

Bathroom tiles can be found in many places, including home improvement stores, tile manufacturers, specialty tile and flooring stores, and online retailers. The choice of tiles is a personal preference, and seeing the tiles with your own eyes is a good opportunity to see the quality, color, and choice of materials.

You can also match the tiles of your choice with other tiles that will be used in different areas of the bathroom. Step into the showroom and see some sample bathroom remodeling ideas, and the opportunity to speak with a design expert can be invaluable during the remodeling process.

When shopping for the best product for you and your bathroom, don’t be afraid to ask questions and compare prices at other stores and online retailers. Here’s something you’ll enjoy for years.